BevPure? Filter Cartridges are specially designed to provide reliable sterilizing filtration at the most economical costs. Hydrophilic PES membrane filters require no pre-wetting and are ready to use. This filter is recommended for the sterile filtration of a wide range of liquids e.g. diluting water and beverages.
Complies with Food Contact Regulations: FDA 21CFR177-182 and 1935/2004 EC
Filter Medium | Single-Layer PES Membrane |
Cage / Support | Polypropylene |
Core / End Caps | Polypropylene |
Max. Temperature | 80°C |
Max. Differential Pressure | 4.0 bar / 21°C (forward flow) 2.4 bar / 70°C (forward flow) |
Bubble Point | BP: >0.34 MPa (water), 0.22 μm BP: > 0.22 MPa(water), 0.45 μm |
Diffusion Flow | DF: < 30 ml/min/10"@ 0.25Mpa(water), 0.22μm DF: < 28 ml/min/10"@ 0.16Mpa(water), 0.45 μm |
Steam Sterilization | ≥200 cycles (135°C/30 min @ Max.Differential Pressure of 0.3 bar) |
Hot Water Sterilization | 85°C/30 min @ Max. Differential Pressure of 2 bar |
Cleaning Solution | 2% NaOH Solution @ ≤65°C |
Effective Filtration Area | 0.58m2 / 10 inch |
The primary purpose of this membrane filter cartridge in beverage filtration is to effectively remove product spoiling microorganisms
Typical Log Reduction Value(LRV) | |||
B.diminuta | Lactobaccilus Brevis | Sasharomyces Cerevisiae | |
0.1μm | > 7/cm2 | N/A | N/A |
0.2μm | > 7/cm2 | N/A | N/A |
0.45μm | N/A | > 7/cm2 | N/A |
0.65μm | N/A | > 4/cm2 | > 7/cm2 |
1.2μm | N/A | N/A | > 7/cm2 |
-R | Removal Ratings | End Cap | Nominal Length | Seal Material | -F | ||
BP | Blank | 0010=0.1μm | DOE=Double Open End | 05= 5" | S=Slilicone | ||
[Ф69] | 0022=0.22μm | HTC=222 O-ring/Flat (PBT Insert) | 10= 10" | E=EPDM | |||
0045=0.45μm | HTF=222 O-ring/Fin (PBT Insert) | 20= 20" | V=Viton | ||||
HSF=226 O-ring/Fin (PBT Insert) | 30= 30" | ||||||
SSF=226 O-ring/Fin (SS Insert) | 40= 40" | ||||||
SSC=226 O-ring/Flat (SS Insert) | |||||||
STF=222 O-ring/Fin (SS Insert, 3 Tabs) |