Cobetter ProtecPP Filter Cartridges are made of thermally bonded polypropylene microfibers. This technology forms a rigid fiber structure providing final protection to ink jet inks prior to filling by eliminating the risk of releasing fibers.
· Thermally-bonded polypropylene microfiber technology eliminates the risk of releasing fibers during the final filling of ink jet inks.
· Uses 18 MΩ pure water flushing in the filter manufacturing process to ensure that the filter itself is cleaned to the highest of standards.
· Polypropylene construction yields excellent compatibility with most ink chemistries
Material of Construction
| Filter Medium | Thermally Bonded Polypropylene |
| Support Layer | Polypropylene / Nylon Mesh |
| Core/Cage/End Caps | Polypropylene |
| O-Ring | Please refer to ordering information |
| Effective Filter Area | ≥0.6 m2 /10 inch |
Operating Conditions
| Max. Operating Temperature | 80°C |
| Max. Differential Pressure | 4.0 bar / 21°C 2.1 bar / 80°C |
Series | Removal Rating | End Cap | Lenght | Seal Material | Industry | ||
SLPP | 0010 0020 0030 0035 0045 0500 0100 1000 2000 4000 | = 0.1μm = 0.2μm = 0.3μm = 0.35μm = 0.45μm = 0.5μm = 1.0μm = 10.0μm = 20μm = 40μm | DOE = Double Open End TC = 222/Flat Cap TF = 222/Fin Cap SF = 226/Fin Cap SC = 226/Flat Cap | 05= 5" 10=10" 20=20" 30=30" 40=40" | S=Slilicone E=EPDM V=Viton P=Encapsulated Viton | C= Chemical | |
COPYRIGHT 2014 Hangzhou Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
