H-SCFC Multi-Round Sanitary Filter Housing specially designed for filtration requiring over 12 filter elements.
Flow redesign with flow pattern of side-in and bottom-out reduce cost when compared to bottom-in bottom-out flow pattern. In addition, top-inlet opening eliminates the need to move the housing body while installing the filter elements, thus reducing filter change-out time.
Rocker arm design makes it easier to move the top cap of the filter housing.
The three-part design and detachable plate allow for a complete cleaning when rigorous cleaning requirements are necessary.
H-SCFC:
top-opening; fixed plate; side-in and bottom-out flow pattern
H-SDFC:
top-opening and bottom-opening; fixed plate; side-in and bottom-out flow pattern
H-SFFC:
top-opening and bottom-opening; detachable plate ; side-in and bottom-out flow pattern
| Polish Type | Mirror Polish or Internal Electro-polished |
| Surface Option | Internal Ra: 0.3μm or External Ra: 0.4μm |
| Max. Operating Pressure | 1.0 Mpa (10 bar) |
| Max. Operating Temperature | 130°C（266°F） |
| Steam Sterilization | In-situ / Autoclave @ 121°C / 30 min |
| Housing Body | 304 or 316L |
| Vent / Drain | 304 or 316L |
| Vent Clamp | 304 |
| Eyebolt | 304 |
| Leg | 304 |
| O-ring/Gaskets | Silicon, Viton, EPDM |
| Body Connection | Flange (Eyebolt) |
| nlet / Outlet | Tri-clamp |
| Vent | Tri-clamp; ID 4mm and for 8mm tube |
| Pressure Gauge | 1.5 inch Tri-clamp |
COPYRIGHT 2014 Hangzhou Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
