Cobetter TIC Titanium Metal Powder Filter Cartridges composed of high-purity industrial-grade titanium powder (99.4%) with all elements sintered at high temperatures. Its features include anti-chemical corrosion, oxidation and high temperature resistance, and long service life. As it is a low viscosity liquid filter, this filter results in good solid-liquid separation efficiency.
This filter is mainly used as a chemical filter to remove ozone-depleting substance and for the removal of carbon dioxide in food, pharmaceutical, and water treatment applications.
| Filter Layer | High-purity Titanium |
| End Cap | High-purity Titanium |
| Screw Cap | 304 Stainless Steel |
| Reinforcing Layers | 304/316 Stainless Steel |
| Diameters | 65mm |
Additional Diameter Specifications Available Upon Request
| Double Open-End (DOE) |
| Single Open-End (SOE) |
| Max. Differential Pressure | 3.0bar |
| Max. Operating Temperature | 280°C |
Physical Cleaning Methods: Reverse-Flow by Clean Water; Reverse-Blow by Clear Air and Ultrasonic Wave
Chemical Cleaning Methods: Use Cleaning Agent Such As Diluted Acid, Diluted Alkalis, Oxidizer, and Surfactant
| Contamination Materials | General Cleaning Method Procedures |
| Decarburization in Pharmaceutical and Chemical Industries | Reverse-blow and reverse-flow used more frequently; ultrasonic wave cleaning used when necessary |
| Non -Water Soluble Salts and Oxides in the Pharmaceutical Industry | Soak in 5% Concentration of Nitric Acid Solution |
| Original Liquid Filtration | Choose the correct cleaning methods as per the chemical properties of the contamination material; The Ultrasonic Wave Cleaning can be combined to use when necessary |
| Chemical Clean ing Methods | Detailed Procedures |
| Alkaline Cleaning | Alkaline Cleaning Soak filter in 3-5% Concentration of AR grade NaOH Solution for 30-60 minutes;solution temperature is 40°C. Flush the soaked filter inside, out with DI water or WFI water until the flushed solution turns neutral , and then test its conductivity. Dry with Pure Air 0.4Mpa |
| Acid Cleaning | Soak it in the 5% Concentration of Nitric Acid Solution for at least 8 hours; solution temperature is 40°C. Flush the soaked filter inside, out with DI water or WFI water until the ushed solution turns neutral, and then test its conductivity. Dry with Pure Air 0.4Mpa |
| Original Liquid Filtration | Clean filter with surfactant caused by contamination with Organic Pollution ( high concentration of Citric Acid recommended for Food and Beverage Applications) |
| Code | Liquid Pore Size (μm) | Differential Pressure (KPa) | Pore Efficiency | Absolute Removal Rate (μm) | Average Air Permeability (L/dm2min) | Flow Rate (m3/h) |
| 1 | 0.45 | 32 | 30-50% | 6 | 0.02 | 0.18 |
| 2 | 1.0 | 25 | 10 | 0.1 | 0.27 | |
| 3 | 3.0 | 6.1 | 20 | 0.5 | 0.33 | |
| 4 | 5.0 | 3.2 | 30 | 1.1 | 1.32 | |
| 5 | 10 | 30 | 50 | 2.7 | 4.2 | |
| 6 | 20 | 2.8 | 70 | 5.6 | 5.6 | |
| 7 | 30 | 6.5 | ||||
| 8 | 5 | 10.5 | ||||
| 9 | 80 | 14.9 | ||||
| 10 | 100 | 18 | ||||
| 11 | 120 | 20 |
Testing Method: Bubble Point Method
Testing Performed According to GB/T5453; Testing DP is 200Pa; Testing Medium is Air
Testing Liquid Viscosity is 1CP.S; Filter Tested with 60mm diameter and 300mm length; Testing Pressure is 1.5 bar
| Length | Filtration Area |
| 5 in. (125 mm) | 0.024m2 |
| 10 in. (300 mm) | 0.047m2 |
| 20 in. (500 mm) | 0.094m2 |
| 30 in. (750 mm) | 0.141m2 |
| 40 in. (1000 mm) | 0.188m2 |
Length and Other Sizes Are Customizable
Tested Filter Diameter is 65mm
| Particle Range | 0.45μm | 1μm | 3μm | 5μm | 10μm |
| ≥2μm | 99.916% | 99.895% | 99.769% | 82.546% | 82.371% |
| ≥5μm | 99.974% | 99.974% | 99.910% | 96.283% | 96.079% |
| ≥10μm | 99.990% | 99.986% | 99.973% | 98.875% | 98.902% |
| ≥12μm | 99.987% | 99.987% | 99.986% | 98.998% | 98.982% |
| ≥25μm | 100.000% | 100.000% | 100.000% | 99.996% | 99.916% |
| ≥35μm | 100.000% | 100.000% | 100.000% | 100.000% | 99.966% |
| ≥50μm | 100.000% | 100.000% | 100.000% | 100.000% | 100.000% |
COPYRIGHT 2014 Cobetter Filtration Equipment Co.,Ltd ALL RIGHTS RESERVED.
